Cool Shot Function; Ionisation Function; Fitting/Removing Attachments - Silvercrest SHAC 2400 C2 Operating Instructions Manual

Cool shot function

You can use the cooling level button 5
with low and high airflows as well as with medium and high heat levels . The low
heat setting has no heat function . If you wish to create a cold air stream, press
and hold the cooling level button 5
stream, release the cooling level button 5

Ionisation function

When drying the hair using a hair dryer, the hair takes on a static charge and
begins to „fly" .
The ionisation function ensures that this charging of the hair is neutralised and
cancelled . The hair becomes soft, supple, shiny and easier to style .
Please note, however, that the ionisation function only works optimally if the
attachments (volume diffuser 6/wide styling nozzle 7/narrow styling nozzle 8)
are removed, as an attachment will interfere with the application of ions to the
hair . Therefore, use the hairdryer without attachments for maximum ionisation
effect .

Fitting/removing attachments

■ To fit one of the attachments (wide styling nozzle 7, narrow styling nozzle 8,
volume diffuser 6), push it onto the front of the hairdryer with slight pressure so
that the attachment snaps into place and is evenly seated on the hairdryer .
■ Always wait until an attachment has cooled down before removing it .
Remove the cooled attachment from the hair dryer by pulling it downwards
with a firm motion .
SHAC 2400 C2
to produce a cool air flow . The works
. When you no longer need the cold air
.
GB │ IE │ NI │ CY │ 7 ■