Cardiac Output - Fluke Biomedical ProSim 8 Series Getting Started Manual

ProSim™ 8
Getting Started Manual
Baseline ................................................................. 500 Ω, 1000 Ω (default), 1500 Ω, 2000 Ω, Leads I, II, III
Baseline Accuracy ................................................ ±5 %
Respiration Lead ................................................... LA or LL (default)
Apnea Selection .................................................... 12 seconds, 22 seconds, or 32 seconds (one-time events), or continuous (Apnea ON =
respiration OFF)
Power-On Default .................................................. 20 BrPM, delta 1.0 Ω
Temperature
Temperature .......................................................... 30.0 °C to 42.0 °C in 0.5 °C steps
Accuracy ................................................................ ±0.4 °C
Compatibility ......................................................... Yellow Springs, Inc. (YSI) Series 400 and 700
Output .................................................................... Circular DIN 4-pin

Cardiac Output

Catheter Type ........................................................ Baxter Edwards, 93a-131-7f
Calibration Coefficient .......................................... 0.542 (0 °C injectate), 0.595 (24 °C injectate)
Blood Temperature ............................................... 36 °C (98.6 °F) to 38 °C (100.4 °F) ±0.2 °C in 1 °C steps
Injectate Volume ................................................... 10 cc
Injectate Temperature ........................................... 0 °C or 24 °C
Cardiac Output ...................................................... 2.5 liters per minute, 5 liters per minute, 10 liters per minute ±7.5 %
Faulty-Injectate Curve .......................................... Waveform for simulation available
Left-to-Right-Shunt Curve .................................... Waveform for simulation available
Calibrated Pulse .................................................... 1.5 °C for 1 second
Connector .............................................................. Circular DIN 7 pin
Power-On Default ................................................. 5 liters per minute, 0 °C injectate, 37 °C blood temperature
20