Operating The Appliance; Tips On Cooking And Frying - Progress PAS6100E User Manual

12 progress
Residual heat can be used for melting
and keeping food warm.

Operating the Appliance

Setting the heat setting
When a cooking zone is switched on, it
may hum briefly. This is a characteristic
Heat setting
To increase
To reduce
Switch off
1. When boiling water/searing food, select a
high heat setting.
2. As soon as steam forms or the fat or oil
is hot, set a lower heat setting.

Tips on Cooking and Frying

Information on acrylamides
According to the latest scientific knowl-
edge, intensive browning of food, espe-
cially in products containing starch, can
constitute a health risk due to acryla-
mides. Therefore we recommend cook-
ing at the lowest possible temperatures
and not browning foods too much.
Cookware
• You can recognise good cookware from
the bottoms of the pans. The bottom
should be as thick and flat as possible.
• Cookware made of enamelled steel or with
aluminium or copper bottoms can leave
discolorations on the glass ceramic sur-
face which are difficult or impossible to re-
move.
Energy saving
Ring control knob
Turn clockwise
Turn anti-clockwise
0
3. To end the cooking process, turn to the
of all ceramic glass cooking zones and
does not impair either the function or the
life of the appliance.
Off position.
Always place cookware on the cooking
zone before it is switched on.
If possible, always place lids on the
pans.
Switch cooking zones off before the end
of the cooking time, to take advantage
of residual heat.
Bottom of pans and cooking zones
should be the same size.
Knob setting
1 - 9
9 - 1