Advertisement
-Read all the safety precautions carefully before you use this tool and
observe them carefully in practice.
-The safety precautions are classified as follows:
WARNING!
Incorrect operation caused by failure to observe this type of precaution
could cause death or serious injury.
Caution!
Incorrect operation caused by failure to observe this type of precaution
could cause injury or physical damage.
-After reading this manual, keep it in a place where the actual user can
refer to it easily.
-Only use this tool for fastening appropriate Pop Nuts.
(Refer to the Pop Nut catalog to select appropriate Pop Nuts).
WARNING!
1. Use compressed air at a pressure of 0.5~0.6 MPa.
Use of compressed air at higher pressure could break the tool as well as
causing accident or injury.
2. Do not point this tool towards anybody else when you use it.
Accident or injury could result as bystanders are entangled or squashed by
the mandrel.
3. Wear safety goggles (satisfying JIS T8147).
If this tool breaks down, parts or pressurized oil could fly out, causing
accident or injury.
4. Before using this tool, check all its parts for damage. If you notice any
damaged parts, stop work and send the tool for repair.
Accident or injury could result if you use this tool while it is damaged.
5. Make sure the compressed air supply couplings are secure.
If the screw threads of the couplings do not match perfectly, or if they are
not screwed in far enough, the hoses and couplers etc. could come off while
the tool is in use, possibly causing accident or injury.
*Refer to section one (p.4) for details of part names.
*A warning label is stuck to the chamber of this tool. If the label is badly
damaged or if it peels off, contact your supplier or one of our offices to
obtain a replacement (a replacement fee will be charged).
Safety Precautions
1
PNT800
Advertisement
