2. Fastening and detachment
Push the Pop Nut perpendicularly into the hole in the base material and pull the
trigger (Figure 6-3).
Keep pulling the trigger throughout fastening and detachment.
Otherwise, detachment cannot be completed.
The Pop Nut is fastened and the tool automatically switches to counterclockwise
rotation to detach from the Pop Nut (Figure 6-4).
Base material
Precautions on fastening
(1) Fit the flange of the Pop Nut closely against the base material.
OK
(2) Do not tilt the tool.
OK
(3) Double caulking (fastening a Pop Nut again after it has initially been
fastened once). If you try to refasten a Pop Nut that has already been fastened,
either the tool or the Pop Nut will break.
Precautions on tool detachment
Pull the tool throughout detachment.
Otherwise, the mandrel cannot detach without reverse rotation.
Figure 6-3
Pull
Trigger
NG
NG
12
PNT800
Pull lightly
Trigger
Keep pulling
Figure 6-4
Figure 6-5
Figure 6-6