Table of Contents
Advertisement
-Read all the safety precautions carefully before you use this tool and
observe them carefully in practice.
-The safety precautions are classified as follows:
WARNING!
Incorrect operation caused by failure to observe this type of precaution
could cause death or serious injury.
Caution!
Incorrect operation caused by failure to observe this type of precaution
could cause injury or physical damage.
-After reading this manual, keep it in a place where the actual user can
refer to it easily.
-Only use this tool for fastening appropriate POP Nuts.
(Refer to the POP Nut catalog to select appropriate POP Nuts).
WARNING!
1. Use compressed air at a pressure of 0.5~0.6Mpa.
Use of compressed air at higher pressure could break the tool as well as
causing accident or injury.
2. Each part must be adjusted properly before operation (See P.11).
Improper adjustment may cause damage the tool and trouble or injury
by shot of broken parts, as well as lowering the tool performance.
3. Wear safety goggles (satisfying JIS T8147).
If this tool breaks down, parts or pressurized oil could fly out, causing
accident or injury.
4. Do not point this tool towards anybody else when you use it.
Accident or injury could result as bystanders are entangled or squashed
by the mandrel.
5. Beware of exhaust air from the air vent.
Exhaust air containing oil and moisture blows strongly out of the
exhaust valve, so keep your face (particularly your eyes) away from the
air vent. The exhaust air may also dirty nearby objects, so care is
required.
6. Before using this tool, check all its parts for damage. If you notice any
damaged parts, stop work and send the tool for repair.
Accident or injury could result if you use this tool while it is damaged.
Safety Precautions
1
Advertisement
Table of Contents
