Lubrication Of The X Rails - GCC Technologies JF-240UV User Manual

6.7 Lubrication of the X Rails

The procedure of Lubrication:
Step 1 Power off the machine
Step 2 Move the carriage rightwards or leftwards to allow the grease being injected.
Step 3 Inject 1ml of grease to the injection opening inside the linear bearing on both side.
Note: Lubrication regularly depending on the job loading, recommend on a quarterly basis.
Lubrication Notes
1. The carriage must move back and forth on one side, while injecting the grease.
2. Users can apply manual lubrication or automatic lubrication to the Miniature linear rail for
regular maintenance.
3. There should always be lubricant coated on the surface of the rail.
4. Apply the lubrication again before the oil changes color due to corrosion.
Lubrication Intervals
1. The length of lubrication interval depends on the working environment, loading and pressure
bearing condition. The length of the lubrication interval varies, and the safe lubrication
intervals can only be known after careful observation.
2. Lubrication interval should not exceed one year.
164
JF-240UV User Manual