1. Manuals
  2. Brands
  3. AGI Manuals
  4. Tools
  5. UTX Series
  6. Assembly manual

AGI UTX Series Assembly Manual

Portable u-trough grain auger
Hide thumbs Also See for UTX Series:
Table of Contents

Advertisement

Quick Links

Download this manual
UTX Series
Portable U-Trough Grain Auger
Assembly Manual
This manual applies to the following brands and models:
Westfield UTX44, AGI UTX44, and Grainmaxx UTX44
Read this manual before using product. Failure to
follow instructions and safety precautions can
result in serious injury, death, or property
damage. Keep manual for future reference.
Part Number: 31084 R3
Revised: July 2020
Original Instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the UTX Series and is the answer not in the manual?

Questions and answers

Related Manuals for AGI UTX Series

Summary of Contents for AGI UTX Series

  • Page 1 Portable U-Trough Grain Auger Assembly Manual This manual applies to the following brands and models: Westfield UTX44, AGI UTX44, and Grainmaxx UTX44 Read this manual before using product. Failure to Part Number: 31084 R3 follow instructions and safety precautions can...
  • Page 2 New in this Manual The following changes have been made in this revision of the manual: Description Section Grainmaxx model added...

  • Page 3: Table Of Contents

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER CONTENTS 1. Introduction ............................5 2. Safety............................... 6 2.1 Safety Alert Symbol and Signal Words..................6 2.2 General Safety ........................... 6 2.3 Rotating Flighting Safety ......................7 2.4 Rotating Parts Safety......................... 7 2.5 Hydraulic Winch Safety ......................7 2.6 Drives and Lockout Safety......................
  • Page 4 UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4.22 Install the Drive Components....................45 4.22.1 Install the Gearbox Pulley ..................45 4.22.2 Install the Idler Assembly..................46 4.22.3 Install the Guard Assembly ..................46 4.22.4 Install the Belt ......................47 4.22.5 Install the Clutch Guard Assembly ................. 48 4.22.6 Install the Gearbox Pulley Cover................

  • Page 5: Introduction

    Before assembling, please read this manual. Familiarize yourself with the process and the necessary precautions for efficient and safe assembly of this Westfield/AGI Portable U-Trough Grain Auger. Everyone present at the assembly site is required to be familiar with all safety precautions.

  • Page 6: Safety

    • Follow a health and safety program for your worksite. Contact your local occupational health and safety organization for information. • Contact your local representative or Westfield/AGI if you need assistance or additional information. • Always follow applicable local codes and regulations.

  • Page 7: Rotating Flighting Safety

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 2. SAFETY 2.3. Rotating Flighting Safety • KEEP AWAY from rotating flighting. • DO NOT remove or modify flighting guards, doors, or covers. Keep in good working order. Have replaced if damaged. • DO NOT operate the auger without all guards, doors, and covers in place.

  • Page 8: Drives And Lockout Safety

    2. SAFETY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 2.6. Drives and Lockout Safety Inspect the power source(s) before using and know how to shut down in an emergency. Whenever you service or adjust your equipment, make sure you shut down the power source and unplug or remove the key (as applicable) to prevent inadvertent start-up and hazardous energy release.

  • Page 9: Hydraulic Power Safety

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 2. SAFETY 2.6.2 Hydraulic Power Safety Power Source • Refer to the rules and regulations applicable to the power source operating your hydraulic drive. • Do not connect or disconnect hydraulic lines while system is under pressure.

  • Page 10: Tire Safety

    2. SAFETY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 2.7. Tire Safety Failure to follow proper procedures when mounting a tire on a wheel or rim can produce an explosion that may result in serious injury or death. • DO NOT attempt to mount a tire unless you have the proper equipment and experience to do the job.

  • Page 11: Personal Protective Equipment

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 2. SAFETY 2.9. Personal Protective Equipment The following Personal Protective Equipment (PPE) should be worn when assembling the equipment. Safety Glasses • Wear safety glasses at all times to protect eyes from debris.

  • Page 12: Safety Decals

    2. SAFETY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 2.11. Safety Decals • Keep safety decals clean and legible at all times. • Replace safety decals that are missing or have become illegible. See decal location figures that follow. • Replaced parts must display the same decal(s) as the original part.
  • Page 13 UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 2. SAFETY Figure 2. Safety Decal Locations P1513136 20803 17113 20807 20813 20811 19960 20817 Figure 3. Safety Decal Locations (HD Hydraulic Steering) 28128 20806 31084 R3...
  • Page 14 2. SAFETY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER Figure 4. Safety Decal Locations (Hydraulic Winch) 20810 20806 31084 R3...
  • Page 15 UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 2. SAFETY Table 1. Safety Decals Part Number Description 20817 DANGER ELECTROCUTION HAZARD To prevent death or serious injury: • When operating or moving, keep equipment away from overhead power lines and devices.
  • Page 16 2. SAFETY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER Table 1 Safety Decals (continued) Part Number Description 20803 (inside) WARNING MISSING GUARD HAZARD To prevent serious injury or death, shut off power and reattach guard before operating machine. 20804 WARNING...
  • Page 17 UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 2. SAFETY Table 1 Safety Decals (continued) Part Number Description 20807 WARNING To prevent serious injury or death: • Read and understand the manual before assembling, operating, or maintaining the equipment. • Only trained personnel may assemble, operate, or maintain the equipment.
  • Page 18 2. SAFETY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER Table 1 Safety Decals (continued) Part Number Description 20811 WARNING UPENDING HAZARD To prevent death or serious injury: • Anchor intake end and/or support discharge end to prevent upending. • Intake end must always have downward weight.
  • Page 19 UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 2. SAFETY Table 1 Safety Decals (continued) Part Number Description P1513136 WARNING CONTENTS MAY BE UNDER PRESSURE As part of the fuel vapour retention system, it is normal for your tank to expand from internal pressure. Use the vent screw to relieve pressure and before refueling.

  • Page 20: Features

    3. FEATURES UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 3. Features This section covers the main features of the auger. Item Description Item Description Discharge & Upper Chain Drive Intake Hopper & Hopper Cloth Shaft Guarding Hydraulic Winch Belt Idler...

  • Page 21: Assembly

    Take pictures of shipments prior to or just after unloading if there are any damaged parts. Report missing or damaged parts immediately to ensure that proper credit is received from Westfield/AGI or your representative, and to ensure that any missing parts can be shipped quickly to avoid holding up the assembly process.

  • Page 22: Hydraulic Fittings And Bolt Tightening

    4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4.4. Hydraulic Fittings and Bolt Tightening Remember the following basic considerations when tightening hydraulic fittings and bolts: • Tighten all fasteners to the torque specified in . Do not replace or substitute bolts, nuts, or other hardware that is of lesser quality than the hardware supplied by the manufacturer.

  • Page 23: Install The Track Stops

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY 4.7. Install the Track Stops Assembly Note: • Slide Track Shoe onto track before attaching upper track stop. Track Stop Locknut, 7/16" Track Shoe Bolt, 7/16" x 1" Track Washer, 7/16"...

  • Page 24: Assemble Driveshaft

    4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4.8. Assemble Driveshaft Lower Driveshaft Driveline Bracket Assembly Driveshaft Connector Bolt, 7/16" x 1-1/4" Square Key, 1/4" x 1-1/2" Flat Washer, 7/16" Set Screw, 3/8" x 3/8" Locknut, 7/16" Driveshaft Guard...
  • Page 25 UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY ~2-¾" Gearbox Mount Bracket Driveshaft Guard Guard Hanger Bracket Bolt, 7/16" x 1-1/4" Flat Washer, 7/16" Bolt, 3/8" x 1" Locknut, 7/16" Locknut, 3/8" 31084 R3...

  • Page 26: Install The Spout

    4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4.9. Install the Spout Spout Bolt, 7/16" x 1-3/4" Locknut, 7/16" 31084 R3...

  • Page 27: Add Grease To Head Cover

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY 4.10. Add Grease to Head Cover 1. Remove the head cover from the discharge end. 2. Fill the head cover half full of grease. 3. Lubricate the chain. 4. Re-install the head cover.

  • Page 28: Install The Hopper Assembly

    4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4.11. Install the Hopper Assembly Hopper Assembly Locknut, 7/16" Bolt, 7/16" x 1-1/4" Lock Collar, 1-1/4" 4.12. Install the Hitch Adapter Offset Hitch Adapter Bolt, 1/2" x 4" Locknut, 1/2" 31084 R3...

  • Page 29: Attach Lower Frame To U-Trough

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY 4.13. Attach Lower Frame to U-Trough Assembly Note: • Ensure that the pulley shim guard is centered on the lower arm bolt plates. Lower Frame Spacer Pulley Shim Guard Bolt, 3/8" x 1–1/2"...

  • Page 30: Attach Lower Frame To Axle

    4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4.14. Attach Lower Frame to Axle Assembly Notes: • Loosely install the lower frame to the axle assembly. • Loosely install all the lower support frame hardware. • Tighten all hardware once all of the hardware has been placed.

  • Page 31: Attach Upper Frame To Trough

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY 4.15. Attach Upper Frame to Trough Upper Frame Arm Bolt, 3/4" x 6-1/2" Track Shoe (Installed in a previous section) Locknut, 3/4" 4.16. Attach Upper Frame to Axle STRONG SLING OR CHAIN...
  • Page 32 4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER Assembly Notes: • Remove the stand from the intake end of the auger trough and raise the discharge end with a block and tackle or a front end loader and a strong sling or chain. Height should be sufficient so the frame can be easily attached to the axle.

  • Page 33: Install The Over-Center Drive

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY 4.17. Install the Over-Center Drive 1. Once the wheel is bolted to the hub, the over-center drive assembly can be installed. 2. Position the axle cap of the over-center drive assembly squarely on the axle tube.

  • Page 34: Adjust The Pinion Gear

    4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4.18. Adjust the Pinion Gear Failure to ensure proper gear meshing will result in gear damage. The pinion gear should mesh with the ring gear to provide maximum tooth contact. Insufficient meshing •...

  • Page 35: Install The Reversible Gearbox

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY 4.19. Install the Reversible Gearbox Assembly Notes: • Check the gearbox oil level; gearbox should be half full. Use only EP90 lube oil and fill to HALF FULL only. • The ends of the gearbox shaft and the driveshaft should be flush with the inside of the chain coupler sprockets.
  • Page 36 4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER Assembly Notes: • Ensure the reversible gearbox components do not interfere with any other auger components. • The detent lever must be in the same position as the gearbox shifter. Ensure the lock pin is engaged with the bracket.

  • Page 37: Install The Motor Mount

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY 4.20. Install the Motor Mount Engine Slider Assembly Cotter Pin, 3/16" x 1-3/4" Motor Pivot Pin Assembly Note: • Ensure leveller tube is through slots in the engine slider assembly before attaching to leveller tube mount brackets.

  • Page 38: Install The Gas Drive

    4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4.21. Install the Gas Drive 4.21.1 Install the Battery and Fuel Tank Fuel Tank Assembly Note: • Route the fuel line between the heat shield and gas tank. Fuel Tank Heat Shield Fuel Tank Straps Bolt, 7/16"...

  • Page 39: Install The Engine Slider Mount Bracket

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY 4.21.2 Install the Engine Slider Mount Bracket Engine Slider Mount Bracket Bolt, 7/16" x 1-1/4" Locknut, 7/16" 31084 R3...

  • Page 40: Install The Hydraulic Pump

    4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4.21.3 Install the Hydraulic Pump Hydraulic Pump Assembly Locknut, 7/16" Bolt, 7/16" x 1-1/4" Steel Fitting, 3/4" HB x 10 MORB Steel Fitting, 8 MORB x 1/2" FNPSM 31084 R3...

  • Page 41: Install The Electric Clutch

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY 4.21.4 Install the Electric Clutch Assembly Note: • Apply anti-seize to the engine shaft where the electric clutch will slide on. Gas Engine Motor Square Key, 1/4" x 3" Electric Clutch, Triple Bolt, 7/16"...

  • Page 42: Install The Cold Weather Kit (Vanguard)

    4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4.21.5 Install the Cold Weather Kit (Vanguard) This section is only required for augers with Vanguard motors 1. Attach the muffler to the engine with bolts. 2. Remove the debris filter cap from the intake air filter port. Save the hose clamp for later use.
  • Page 43 UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY Intake Air Filter Port Air Filter Cap Hose Clamp Clamp Drain Port Intake Air Filter Ducting Intake Air Filter Mount Bolts (Supplied with Muffler Kit) Muffler Shield Port Muffler 31084 R3...

  • Page 44: Install The Motor

    • If using a Vanguard motor for installation, there is a possible interference with the (standard) muffler hitting the belt guards. If this happens, then please contact your local AGI dealer for an alternative. • Perform all the engine wiring.

  • Page 45: Install The Drive Components

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY 4.22. Install the Drive Components 4.22.1 Install the Gearbox Pulley Assembly Notes: • Ensure that the hub set screws are toward the outside. • The distance between the face of the gearbox shaft and the outside hub should be 3/8".

  • Page 46: Install The Idler Assembly

    4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4.22.2 Install the Idler Assembly Assembly Notes: • Use a level/square to ensure the idler assembly is mounted straight. • The slots in the main plate can be used to adjust the tilt of the pulleys.

  • Page 47: Install The Belt

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY 4.22.4 Install the Belt Pump Belt Assembly Note: • Rotate the pump handle clockwise to apply tension to the pump belt and pull down the handle to lock the belt in place.

  • Page 48: Install The Clutch Guard Assembly

    4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4.22.5 Install the Clutch Guard Assembly Installing the Clutch Guard Assembly Note: • Slip clutch guard over the electric clutch and slide into the guard assembly. Clutch Guard Bolt, 3/8" x 1"...
  • Page 49 UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY Installing the Manual Belt Engage Guide Rod Manual Belt Engage Guide Rod Bolt, 1/2" x 1-3/4" Manual Belt Engage Mount Bracket Locknut, 1/2" Installing the Manual Belt Engage Handle Assembly Manual Belt Engage Threaded Rod Bolt, 1/2"...

  • Page 50: Install The Gearbox Pulley Cover

    4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4.22.6 Install the Gearbox Pulley Cover Pulley Guard Cover Whiznut, 3/8” Bolt, 3/8” x 5” 4.22.7 Tension the Belt TIGHTEN BELT LOOSEN BELT Assembly Note: • Use the two hex nuts to apply tension to the drive belt prior to installing the guard cover.

  • Page 51: Wire The Electric Clutch

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY 4.23. Wire the Electric Clutch 1. Remove (cut off) the clutch harness connector that includes a connection clip on one side. 2. Prepare the cut end for connection by trimming harness jacket and wire...

  • Page 52: Install The Lift Cable

    4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4.24. Install the Lift Cable 1. Attach the cable to the cable attach rod welded to the bottom of the track by wrapping it around the rod and doubling-back about 7" (18 cm) of cable.

  • Page 53: Install The Hydraulic Winch And Connect The Lift Cable

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY 4.25. Install the Hydraulic Winch and Connect the Lift Cable Hydraulic Winch Hydraulic Winch Assembly Locknut, 3/8" Steel Fitting, 90, 6 MNPT x 6 FNPSM Flat Washer, 3/8" 31084 R3...
  • Page 54 4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER Connect Lift Cable Winch Cable 1. Pull cable to the winch. 2. Wrap the cable over and around the winch drum. 3. Thread the cable through the hole in the side of the winch drum and secure it using a cable clamp.

  • Page 55: Install The Hopper Canvas Handle

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY 4.26. Install the Hopper Canvas Handle Hopper Canvas Handle Locknut, 7/16" Rubber Handle Grip Bolt, 3/8" x 1-1/2" Bolt, 7/16" x 1" Locknut, 3/8" Flat Washer, 7/16" 31084 R3...

  • Page 56: Install The Hopper Cable

    4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4.27. Install the Hopper Cable Hopper Cable Flat Washer, 3/8" Bolt, 3/8" x 1-1/2" Locknut, 3/8" 31084 R3...

  • Page 57: Install The Hydraulic Oil Tank

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY 4.28. Install the Hydraulic Oil Tank 7 " 28 " Assembly Notes: • Place the first hydraulic tank mount 7" from the end of the tube. • Place the second hydraulic tank mount 28" from the end of the tube.
  • Page 58 4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER Assembly Note: • Ensure the cap is located on the raised side. Hydraulic Tank Locknut, 1/4" Square U-Bolt, 1/4" x 7-1/4" x 7-5/8" 31084 R3...

  • Page 59: Install The Hydraulic Filter

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY 4.29. Install the Hydraulic Filter Assembly Note: • The hydraulic hoses MUST be installed to ensure that the oil flows to the tank, in the same direction as the arrow on the filter head.

  • Page 60: Install The Cushion Block

    4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4.30. Install the Cushion Block Cushion Block Steel Elbow, 90, 6 MNPT x 6 FNPSM Bolt, 5/16" x 3/4" Steel Fitting, 3/8" MNPT x 3/8" FNPSM Lock Washer, 5/16" 31084 R3...

  • Page 61: Install The Hdsp Kit Undercarriage

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY 4.31. Install the HDSP Kit Undercarriage INTAKE Assembly Notes: • Ensure the flanges where the walking beams and main axle meet are all aligned toward the intake end of the auger.
  • Page 62 4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER INTAKE Assembly Note: • This joint must pivot - do not over-tighten. Bolt, 1/2" x 1-1/2" Axle End Cap Lock Washer, 1/2" 31084 R3...
  • Page 63 UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY HD SP Reach Arm Frame Crossmember Bolt, 1/2" x 1-1/2" Bolt, 7/16" x 1-1/4" Locknut, 1/2" Locknut, 7/16" 31084 R3...
  • Page 64 4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER HD SP Reach Arm Bolt, 3/4" x 2" Axle Locknut, 3/4" 31084 R3...
  • Page 65 UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY Assembly Note: • These joints must pivot — do no over-tighten. Slider Assembly Bolt, 5/8" x 2" Bolt, 3/4" x 2" Locknut, 5/8" Locknut, 3/4" 31084 R3...
  • Page 66 4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER INTAKE Assembly Notes: • On each walking beam, attach a piece of angle iron and clamp it onto the wheel forks to ensure all wheels are straight and parallel. • This joint must pivot — do not over-tighten Steering Link Bolt, 1/2"...

  • Page 67: Install The Hydraulic Steering Control Arm

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY 4.32. Install the Hydraulic Steering Control Arm INTAKE Assembly Notes: • Ensure the orientation of each steering pivot is correct. • This joint must pivot - do not over-tighten. • Apply paint on top of pivot shafts to prevent rust.
  • Page 68 4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER Assembly Notes: • Remove the angle irons attached on the walking beams. • Ensure that all wheels are engaged and the linkage functions smoothly. • Check for clearance between the tires and transport frame pipes in all steering positions.
  • Page 69 UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY Steel Fitting, 45, 6 MORB x 6 MJIC Steel Fitting, 45, 8 MORB x 1/2 FNPSM 31084 R3...

  • Page 70: Attach The Transport Chain

    4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4.33. Attach the Transport Chain Assembly Notes: If necessary, the transport chain assembly can be shortened. • Remove mid link from chain. • Attach mid link to the appropriate chain link.

  • Page 71: Install The Line Blocks

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY 4.34. Install the Line Blocks Line Block Flat Washer, 3/8" Bolt, 3/8" x 2-1/2" Locknut, 3/8" 31084 R3...

  • Page 72: Attach The Hydraulic Hoses

    4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4.35. Attach the Hydraulic Hoses E1, E2, F1, F2 F1, F2, C, B E1, E2 31084 R3...
  • Page 73 UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY Hydraulic Hoses, HD SP Kit with Hydraulic Steering Length Item Hose Ends 3/4" x 78" 1/2 MNPT x 1/2 MNPT 1/2" x 240" 1/2 MNPT x 1/2 MNPT 1/2" x 240"...
  • Page 74 4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER Hose Routing Serious operator injury could occur if the transport unit and hydraulic hoses are not assembled correctly. If necessary, disconnect the hoses and re-assemble. The SP Transport unit MUST operate as indicated on the control panel decal. The auger MUST move in the direction that the handle is moved.
  • Page 75 UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY Hydraulic Hoses E1 and E2 Note Route hoses E1 and E2 along the axle using the line blocks, through the HDSP reach arm and route to the valve. 31084 R3...
  • Page 76 4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER Hydraulic Hoses H1 and H2 31084 R3...
  • Page 77 UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY Hydraulic Hose A Note Route hose A under the engine slider assembly along the lower frame. 31084 R3...
  • Page 78 4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER Hydraulic Hose J 31084 R3...
  • Page 79 UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY Hydraulic Hose C too t p Note Route hose C along the axle, through the HDSP reach arm and route to the valve. 31084 R3...
  • Page 80 4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER Hydraulic Hose B Note Route hose B up through the HDSP reach arm and route to the valve. 31084 R3...
  • Page 81 UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY Hydraulic Hoses F1 and F2 too t p Note Route hoses F1 and F2 down through the lower frame, along the axle, up through the HDSP reach arm and route to the valve.
  • Page 82 4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER Hydraulic Hoses D1 and D2 Hydraulic Steering Note Route hoses D1 and D2 to the valve. Hydraulic Hoses I1 and I2 tooltip Note Route hoses I1 and I2 to the valve.
  • Page 83 UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY Hydraulic Steering Valve 31084 R3...

  • Page 84: Install The Hitch Mount

    4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4.36. Install the Hitch Mount Hitch Mount Locknut, 3/8" Square U-Bolt, 3/8" x 3-1/16" x 4" 4.37. Install the Manual Holder Manual Holder Mount Locknut, 3/8" Manual Holder Bolt, 1/4" x 3/4"...

  • Page 85: Install The Tow Bar

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4. ASSEMBLY 4.38. Install the Tow Bar Transport Position Grip Clip Offset Hitch Clevis Pin Not in Transport Position Offset Hitch Grip Clip Clevis Pin 31084 R3...

  • Page 86: Install The Work Lights

    4. ASSEMBLY UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 4.39. Install the Work Lights 1. Install the discharge-area flood lamp to the track stop with a bolt, washer, and locknut, then plug the wiring harness connector into the flood lamp connector. Ensure that the connectors are fully engaged.

  • Page 87: Specifications

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 5. SPECIFICATIONS 5. Specifications Specification Trough Width 11" (279 mm) CAPACITIES Unloading Rate 7000–9000 Bu/Hr TRANSPORT DIMENSIONS Length 45'6" (13.9 m) 8' (2.4 m) Width Height 10'6" (3.2 m) DISCHARGE CLEARANCE DIMENSIONS 9'6" (2.9 m) 18'1"...

  • Page 88: Appendix

    6. APPENDIX UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 6. Appendix 6.1. Bolt Torque Table 2 gives the correct torque values for various hardware. Tighten all bolts to the torque specified, unless otherwise noted. Check tightness periodically, using Table 2 as a guide.

  • Page 89: Fittings Torque Values

    UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 6. APPENDIX 6.2. Fittings Torque Values These specifications are for carbon steel. With Zinc plating always lubricate threads and seals. For stainless steel, use the high value of the torque range of steel. For brass, use 70% of the torque value of steel. For mixed metals, use the torque of the lower of the two metals.
  • Page 90 6. APPENDIX UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER Table 5 Stud End O-Ring Boss (ORB) SAE (U/UF) – Carbon Steel (continued) Max N-m Tube Size Thread UNF-2A Max ft-lbs 22-24 29-33 9/16" - 18 40-43 49-53 3/4" - 16...
  • Page 91 UTX SERIES – PORTABLE U-TROUGH GRAIN AUGER 6. APPENDIX 31084 R3...
  • Page 92 P.O. Box 39 Rosenort, Manitoba, R0G 1W0 Canada Phone: (866) 467-7207 (Canada & USA) or (204) 746–2396 Fax: (866) 768-4852 Website: www.grainaugers.com Email: sales@grainaugers.com ©Ag Growth International Inc. 2020 Printed in Canada If you have any comments or questions on this manual, or find an error, email us at comments@aggrowth.com. Please include the part number listed on the cover page in your message.

This manual is also suitable for:

Utx44Westfield utx44Grainmaxx utx44

Table of Contents