Samsung SCX-6345N User Manual page 91

Message Meaning
Paper Sensed in When the machine
DADF. is on, jammed paper
is detected in the
DADF.
Rear Jogger Fault Rear Jogger is not
operating.
Registration Jam Paper has jammed
in the registration
area.
Replace Drum The drum cartridge
is at the end of its
life. When the drum
replacement
message appears
on the screen and if
you select
Continue, this
message displays.
Replace Drum1 The drum cartridge
is at the end of its
life. When the drum
replacement
message appears
on the screen and if
you select Stop, this
message displays.
Replace toner Soemtimes the
machine connot
recognize refilled or
reinstalled toner.
When users face
this case, they have
to buy and change
toner cartridge.
Scan Feeding Jam The lead edge of the
document failed to
actuate the scan
sensor within the
correct time after
actuating the
registration sensor.
Suggested solutions
Open the DADF cover
and remove the
jammed original.
(Page 11.1)
Open the finisher
door and clear any
jammed paper (if
there is). If this error
message shows on
the screen again,
cycle power. If the
problem persists, call
for service.
Clear the jam.
(Page 11.6)
Replace a drum
cartridge with a
Samsung-genuine
drum cartridge.
(Page 10.4)
Replace a drum
cartridge with a
Samsung-genuine
drum cartridge.
(Page 10.4)
Replace the toner
cartridge with a
Samsung-genuine
toner cartridge.
(Page 10.3)
Open the DADF cover
and remove jammed
original. (Page 11.1)
11.12
Message Meaning
SMPS Fan failure There is a problem
with the SMPS
(Switch Mode Power
Supply) Fan.
Stacker Fault Stacker unit is not
operating.
Stapler Empty Stapler is run out.
Stapler Fault Stapler is not
operating.
Support Finger Support Finger unit
Fault is not operating.
Toner Cartridge Communication
Communication between the toner
Error cartridge and the
machine has failed.
Toner Empty, The toner in the
Replace Toner1 cartridge has run
out. The machine
stops print job.
Toner Low The toner cartridge
is almost empty.
<Troubleshooting>
Suggested solutions
Unplug the power
cord and plug it back
in. If the problem still
persists, please call
for service.
Remove paper from
the output tray
(finisher). If this error
message shows on
the screen again,
cycle power. If the
problem persists, call
for service.
Order Staple
Cartridge.
(Page 12.2) And
replace it. (Page 13.2)
Remove paper from
the output tray
(finisher) and open
the finisher door to
clear the jammed
paper. If this error
message shows on
the screen again,
cycle power. If the
problem persists, call
for service.
Remove paper from
the output tray
(finisher). If this error
message shows on
the screen again,
cycle power. If the
problem persists, call
for service.
Reinstall the toner
cartridge. If the
problem persists,
replace it.
Replace the toner
cartridge with a
Samsung-genuine
toner cartridge.
(Page 10.3)
Ensure a replacement
cartridge is in stock.