Roller Misfeed; Clearing Paper Jams; In The Tray 1 - Samsung SCX-6345N User Manual

Roller misfeed

1 Open the scanner lid.
2 Grasp the misfed paper, and remove the paper from the feed area
by carefully pulling it to the right using both hands.
3 Close the scanner lid. Then load the removed pages back into the
DADF.

Clearing paper jams

When a paper jam occurs, the warming message appears on the display
screen. Refer to the table below to locate and clear the paper jam.
Message Location of jam
Feed Jam at Tray 1, In the paper feed area (tray 1,
optional tray, or multi-purpose
Feed Jam at Tray 2,
tray)
Feed Jam at Tray 3,
Feed Jam at Tray 4,
Feed Jam at MP
Tray
Check Tray 2 Feed In the paper feed area
Area, (optional tray)
Check Tray 3 Feed
Area,
Check Tray 4 Feed
Area
Jam at Fuser In the fuser area or around
the toner cartridge
Registration Jam In the paper exit area
1
1
scanner lid
Go to
below and
page 11.5
Page 11.3
Page 11.5
Page 11.6
11.2
Message Location of jam
Duplex Jam 0, In the duplex unit
Duplex Jam 1,
Duplex Jam 2
Finisher Jam 0 In the stacker unit
Finisher Jam 1, In the stacker unit
Finisher Duplex
Jam
Finisher Jam 2 In the stacker unit
Caution
To avoid tearing the paper, pull the jammed paper out gently
and slowly. Follow the instructions in the following sections to
clear the jam.

In the tray 1

1 Pull out the paper tray to open. After you pull it out completely, lift
the front part of the tray up slightly to release the tray from the
machine.
<Troubleshooting>
Go to
Page 11.6
Page 11.7
Page 11.7
Page 11.8