Samsung SCX-6345N User Manual page 90

Message Meaning
Jam in Tray 2 Paper has jammed
in the feeding area
Jam in Tray 3
of the tray.
Jam in Tray 4
LSU Hsync Error A problem has
occurred in the LSU
LSU Motor Error
(Laser Scanning
Unit).
Main motor failure There is a problem
in the motor unit.
MCB to DADF The communication
Communications error has occurred.
Fault
MCB to NIC
Communications
Fault
MCB to Tray 2
Communications
Fault
MCB to Tray 3
Communications
Fault
MCB to Tray 4
Communications
Fault
MCB Watchdog MCB software is not
Detects Software responding.
Failure
Memory Failure Memory access
failed.
Network cable is The network cable is
disconnected disconnected.
Network card is The network card
not installed does not work
properly.
Suggested solutions
Clear the jam.
(Page 11.2 and
page 11.3)
Unplug the power
cord and plug it back
inches. If the problem
persists, please call
for service.
Unplug the power
cord and plug it back
in. If the problem still
persists, please call
for service.
Turn the machine off
and turn it on again. If
the problem persists,
please call for
service.
Turn the machine off
and turn it on again. If
the problem persists,
please call for
service.
Turn the machine off
and turn it on again. If
the problem persists,
please call for
service.
Connect the network
cable properly.
Turn the machine off
and turn it on again. If
the problem persists,
please call for
service.
11.11
Message Meaning
Non Genuine The drum cartridge
Drum, Replace installed is not a
Drum genuine cartridge.
This message
appears when you
selected Continue
at Non Genuine
Drum, Replace
Drum prompt.
Non Genuine The drum cartridge
Drum, Replace installed is not a
Drum1 genuine cartridge.
This message
appears when you
selected Stop at
Non Genuine
Drum, Replace
Drum1 prompt.
Non Genuine The toner cartridge
Toner, Replace installed is not a
Toner genuine cartridge.
This message
appears when you
selected Continue
at Non Genuine
Toner, Replace
Toner prompt.
Non Genuine The toner cartridge
Toner, Replace installed is not a
Toner1 genuine cartridge.
This message
appears when you
selected Stop at
Non Genuine
Toner, Replace
Toner1 prompt.
Output Bin full The printed papers
are full on the output
tray.
Paddle Fault Paddle unit is not
operating.
<Troubleshooting>
Suggested solutions
Install the Samsung-
genuine drum
cartridge.
Install the Samsung-
genuine drum
cartridge.
Install the Samsung-
genuine toner
cartridge.
Install the Samsung-
genuine toner
cartridge.
Remove printed outs
from the output tray.
Open the finisher
door and clear any
jammed paper (if
there is). If this error
message shows on
the screen again,
cycle power. If the
problem persists, call
for service.