Authentication; Optional Service - Samsung SCX-6345N User Manual

Scx-6x45 series monochrome laser multifunction
Hide thumbs Also See for SCX-6345N:
Table of Contents

Advertisement

Authentication

This feature lets you control and lock all outgoing data, or change the
password.
1
Press Machine Setup on the control panel.
2
Press Admin Setting. When the login message pops up, then enter
password and press OK.
3
Press the Setup tab > Authentication.
Option
Authentication
Network
Mode
Accounting
Foreign Device
Interface
Description
It enables the authentication
mode which can be used for
Job Accounting Plug-in the
SyncThru™ Web Admin
Service.
When you install the optional
FDI kit, select On to activate it.
• Job Timer: If there is not
enough credit, you can set the
machine to cancel a job right
away or wait a designated
amount of time for a deposit.
• Print Job Control: When it is
enabled, the both computer
printing and copying are
possible since the credit
remains. With Disable, only
the copy printing job needs
the credit. (which means a
computer printing a report or a
fax job needs no credits)
• Inhibit Services: When no
credit is left, the machine
disables the copy job only with
Copy Only. With All Service,
scanning service and copy job
are disabled.
Option
Authentication
Foreign Device
Mode
Interface
(Continue)
(Continue)
No
Authentication
Mode
Change Admin. Password

Optional Service

When you want to add the optional features for this machine, you have to
install the optional kit and then set the machine to enable and activate
those features. Follow the next steps to enable those features.
1
Press Machine Setup on the control panel.
2
Press Admin Setting. When the login message pops up, then enter
password and press OK.
3
Press the Setup tab > Optional Service.
Option
N/W Scan
If you are not using the network scan feature,
select Disable, then the Scan icon on the
display will be grayed out.
9.6
<Machine status and advanced setup>
Description
• Internal Credits: It is used
when you cancel the job or
when the job is cancelled by
the device due to insufficient
credits (coin) or is canceled by
user's request. If you select
Enable, the machine deposits
a credit equal to the number
of sheets that did not print out
correctly, then it prints next job
for free (for the amount
deposited). With Disable,
even if you cancel the printing
job, the machine includes
jammed paper in the count
and the cost of printing.
• Image Counter: Depends on
whether the machine counts
blank white pages.
It disables Authentication
Mode.
You can change the password
for the Admin Setting
authentication.
Description

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scx-6345njScx-6x45

Table of Contents