Adjusting Of The Footplate - Vermeiren 925 Instruction Manual

3.3

Adjusting of the footplate

3.3.1 Length of the footplate
L L L L
CAUTION:
Risk of damage – Avoid that the footplate make any contact with the
ground. Keep a minimum distance from 60 mm above the ground.
2
3.3.2 Depth of the footplate
The depth of the footplate can be adjust over a range of 75 mm.
1
1
2
Y
X
Z
1
Page 12
Adjust the length of the footplate as follow:
1. Remove the screws
adjustment plates
sides.
2. Adjust the length of the footplate to a
comfortable length.
3. Tighten the screws
To adjust the footplate length to the most
minimum positions:
1. Remove the screws
adjustment plates
sides.
2. Remove also the screws on the
bottom side of the two adjustment plates
.
3. Turn the adjustment plate over
180° around the Z-axle.
4. Switch the left adjustment plate to the
right side and do the opposite for the
right adjustment plate.
5. Retighten all screws properly.
Adjust the depth of the footplate as follow:
1. Remove the screws located on the
bottom side of the two adjustment plates
.
2. Adjust the depth of the footplate to a
comfortable position.
3. Tighten the screws properly.
925
2011-07
of the two
located on both
properly.
of the two
located on both