Installation; Installation Checklist - Swan Analytical Instruments AMU Inducon Operator's Manual

AMU Inducon

Installation

3.
3.1.
Check
Installation
Electrical
connections
Sensor
Instrument
setup
Calibration
12
Installation

Installation Checklist

Instrument's specification must conform to the National Electri-
cal Code, all state and local codes, and all plant codes and stan-
dards for electrical equipment.
The transmitter is intended for panel mounting. The dimensions
are shown under
Connect all external devices, see
Connect the power cord, but do not switch on power until all ex-
ternal devices are connected.
Electrical Connections, p.
Program all parameters for sensor and external devices (inter-
face, recorders, etc.). Program all parameters for instrument
operation (limits, alarms).
Calibrate the sensor if needed. See
details.
Dimensions of the AMU Transmitter, p.
Electrical Connections, p.
14.
Calibration, p. 26
13.
14.
for more
A-96.250.421 / 230320