Huawei SUN2000-55KTL Series User Manual page 85

SUN2000-(55KTL, 60KTL) Series
User Manual
No. Parameter Description
11 Soft start Specifies the duration
time for the power to
gradually increase
when the SUN2000
starts.
12 Current When the IV curves of
error PV strings are being
during scanned, the current
scanning
change of PV strings
operating properly
should be monitored to
avoid inaccurate
scanning caused by
sunlight change. If the
current exceeds the
specified value, it is
determined that the
sunlight changes, and
the IV curves should
be scanned again.
13 Hibernate The SUN2000
at night monitors PV strings at
night. If Hibernate at
night is set to Enable,
the monitoring
function of the
SUN2000 will
hibernate at night,
reducing power
consumption.
14 MBUS For SUN2000 models
communic that support both
ation RS485 and MBUS
(PLC) communication,
when RS485
communication is
used, you are advised
to set MBUS
communication to
Disable to reduce
power consumption.
Issue 06 (2020-01-03)
Unit Default
Value
s The default
value varies
depending
on the grid
code. The
displayed
value
prevails.
A 0.20
N/A Disable
N/A Enable
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
Value Range Remarks
[20, 1800] N/A
[0.00, 2.00] N/A
 Disable N/A
 Enable
 Disable N/A
 Enable
79