SUN2000-(55KTL, 60KTL) Series
User Manual
The metal contacts supplied with the Amphenol Helios H4 PV connectors are either the
cold forming contacts or stamping forming contacts. Choose the crimping tools that fit the
metal contact types. Do not mix up the tools.
Crimp the metal cold forming contacts using crimping tool UTXTC0001 (recommended)
or H4TC0001. When choosing H4TC0001, do not use the locator.
Crimp the metal stamping forming contacts using crimping tool UTXTC0002.
Figure 5-13 Locator
(1) Locator
Figure 5-14 Preparing positive and negative connectors (using metal cold forming contacts)
(1) Positive metal contact (cold forming)
(3) Positive connector
Issue 06 (2020-01-03)
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
(2) Negative metal contact (cold forming)
(4) Negative connector
44