Huawei SUN2000-55KTL Series User Manual page 31

SUN2000-(55KTL, 60KTL) Series
User Manual
Figure 4-13 Determining hole positions
Step 2 Drill holes using a hammer drill.
Figure 4-14 Drilling holes
Step 3 Align the mounting plate holes with the drilled holes, insert bolt assemblies (flat washers,
spring washers, and M12x40 bolts) into the holes through the mounting plate, and secure
them using the shipped stainless steel nuts and flat washers.
Issue 06 (2020-01-03)
You are advised to apply anti-rust paint on the hole positions for protection.
Copyright © Huawei Technologies Co., Ltd.
4 Installation
25