Determining The Installation Position - Huawei SUN2000-55KTL Series User Manual

SUN2000-(55KTL, 60KTL) Series
User Manual

4.3 Determining the Installation Position

Basic Requirements



If the equipment is installed in a public place or in an area of people activities, such as a
parking lot, station, factory building, or residential area, install a protective net outside the
equipment and erect a safety warning sign to isolate the equipment. The purpose is to avoid
personal injury or property loss caused by contact with the equipment by nonprofessionals or
other reasons during the operation of the equipment.
Environment Requirements


Figure 4-2 Awning
Carrier Requirements


Issue 06 (2020-01-03)
The SUN2000 is protected to IP65 and can be installed indoors or outdoors.
Do not install the SUN2000 in a place where personnel are easy to come into contact
with its chassis and heat sinks, because these parts are extremely hot during operation.
Do not install the SUN2000 in areas with flammable or explosive materials.
The SUN2000 must be installed in a well-ventilated environment to ensure good heat
dissipation.
Recommended: Install the SUN2000 in a sheltered place or a place with an awning.
The mounting structure where the SUN2000 is installed must be fire-resistant.
Do not install the SUN2000 on flammable building materials.
Copyright © Huawei Technologies Co., Ltd.
4 Installation
18