Table of Contents
Advertisement
10
ATTENTION
Specified intervals
10.1
Exclusion of liability
© Elma Schmidbauer GmbH
Maintenance actions / service intervals
The warranty is void in the case of maintenance tasks not
carried out or exceeding the intervals. The manufacturer shall
not accept any liability for personal injuries and property
damage resulting from maintenance not having been
performed.
For safety reasons, strictly replace these components within the
specified intervals.
The components concerned are divided in various categories:
5 years service interval for components which must be replaced
by trained staff. See Chapter 10.1.
Service intervals according to the display which are performed
by trained staff. See Chapter 10.2.
Automatic safety tests. These are performed automatically
according to predefined requirements after confirming the
cleaning cycle using the Start button.
•
Simple safety test is performed after the cleaning machine
has been disconnected from and reconnected to the mains
power supply.
•
Extended safety test is performed after 500 cleaning cycles,
at the latest every 3 months. See Chapter 10.3.
5 years service interval by Service staff
The components shown below must only be replaced by trained
staff for safety reasons.
Contact your dealer or a Service Centre authorised by the
manufacturer in good time to agree the further procedure.
Safe operation of the cleaning machine is no longer
guaranteed. The required service must strictly be performed to
continue operating the cleaning machine. The manufacturer
shall not accept any liability for injuries to persons and property
damage resulting from further operation.
BA_Elmasolvex_VA_EN_Vers.05.2018
Maintenance actions / service intervals
77
Advertisement
Table of Contents
