Table of Contents
Advertisement
Daily cleaning operation
Fig. 6.3.3 Display Safety test progress
After performing the safety test, the cleaning machine
automatically continues with the selected cleaning program.
Initialisation phase
After a short initialisation phase of 30 seconds, the cleaning
machine starts filling the cleaning chamber by the resulting
vacuum.
This process is shown on the display (Fig. 6.3.4).
Fig. 6.3.4 Display Status of the program progress
Start of the cleaning
After completion of the initialisation phase, the corresponding
program
notification in the display is cleared and the cleaning program is
started.
The remaining time until the end of the cleaning program is
displayed.
Initialising pager
If you have a pager, you can initialise this now (for description,
(optional accessory)
see Chapter 15 Appendix 2: Pager).
Progress display of the
The detailed progress of the cleaning program can be shown on
cleaning program
the display (Fig. 6.3.5): Press the corresponding operating
button
(Fig.6.3.4) to display this function.
37
© Elma Schmidbauer GmbH
BA_Elmasolvex_VA_EN_Vers.05.2018
Advertisement
Table of Contents
