Contents EU Declaration of conformity......1 Warnings............1 Product information .........2 Key for item name........2 Intended use .........2 General ..........2 Technical data ........3 3.4.1 Dimension ........3 3.4.2 Wiring diagram ......4 Transportation and storage.......5 Installation.............6 Commissioning ........8 Maintenance ..........8 Important ..........8 Cleaning the fan........8 Troubleshooting..........8 Deinstallation/dismantling.........8 Disposal ............9...
EU Declaration of conformity | EU Declaration of conformity The manufacturer: Systemair GmbH Seehöfer Straße 45 97944 Boxberg Germany Product designation: Circular duct fans Type designation: prio 150–250, prio silent XP 150–315 2020 Since year of manufacture: The manufacturer declares that the above mentioned products in their design and construction and the version...
• Installation outside without weather protection General This manual concerns prio 150–250 and prio silent XP 150–315 (manufactured by Systemair GmbH). This manual consists of basic information and recommendations concerning the design, installation, start-up and opera- tion, to ensure a proper fail-free operation of the unit. The key to proper and safe operating of the unit is to read this manual thoroughly, use the unit according to given guidelines and follow all safety requirements.
The data on the name plate of the fan apply to "standard air" according to ISO 5801. 3.4.1 Dimension Table 1 Dimensions prio 150–250 [mm] prio 150E2 prio 150EC prio 160E2 prio 160EC prio 200E2 ØB ØB...
| Product information 3.4.2 Wiring diagram prio silent XP 150E2, prio silent XP 160E2, prio silent XP 200E2, prio silent XP 250E2, prio Silent XP 250E2–L, prio Silent XP 315E2–L Function/assignment Power supply 230 V AC, 50...60 Hz Neutral conductor Protective conductor Speed control: Voltage controllable (See accessories in our...
Product information | Electrical connection accessories for EC version Symbol fan ♦ The potentiometer must be disconnected if the fan should be controlled by other 0-10V accessories via 0–10V (e.g. accessories below). Controll via 0–10V signal S-5EC/FRQ MTP 10 MTP 20 S-5EC/FRQ MTV—1/10 EC-Basic...
| Installation Installation Danger • Make sure that the mains power supply to the unit is disconnected before performing any maintenance or electrical work! • All electrical connections must be carried out by an authorized installer and in accordance with local rules and regulations.
Page 11
Installation | Installation options prio silent XP 150–315 Flap Example — Rope installation Optional key hole. Overview Details Nut M8 Sleeve with female thread M8 Screw M8 (e.g. DIN 933) Washer Y- Installation example “Rail” or “screws and dowels” installation on a wall or ceiling. | 002...
| Maintenance Commissioning Danger • All electrical connections must be carried out by an authorized installer and in accordance with local rules and regulations. Before initial operation, check the following: • Electrical connection has been properly completed. • Protective earth has been connected. •...
Disposal | Disposal ♦ Ensure material is recycled. Observe national regulations. ♦ The device and the transport packaging are predominantly made from recyclable raw materials. ♦ Disassemble the fan into its components. ♦ Separate the parts according to: • reusable material •...
Need help?
Do you have a question about the prio 150E2 and is the answer not in the manual?
Questions and answers