Installing A Hard Drive - Samsung NV20 Manual

Installing a Hard Drive

To install a hard drive:
1. Remove the old hard drive from the computer as described in the previous section.
2. Remove the 4 HDD retaining screws to remove the old HDD from the drive
bracket.
3. Place the new HDD into the drive bracket and the replace the 4 retaining screws.
4. Slide the new drive into the hard drive compartment. Make sure the drive is pushed
back as far as it will go.
5. Install the screw that holds the hard drive in place.
6. If required, install windows and appropriate device drivers according to the
instructions below. For details, see "Reinstalling Windows XP" on page 92 and
"Reinstalling Software" on page 90.
66 Users Manual