Adding a Hard Drive
This computer contains either a single hard drive or dual hard drives (optional).
If your computer has a single hard drive, you can install an additional hard drive in the
secondary hard drive bay.
Before You Start!
The images used in the instructions below are for illustration purposes only and may
diff er from the actual product.
Supports 9.5mmH 2.5" SATA2 notebook hard drives only (sold separately).
Caution: Hard drive cases have sharp edges that can cause injury.
When adding another hard drive, use the secondary hard drive case, connector, and
screws that are provided with this product.
Adding a Hard Drive
1
Shut down the computer completely
and unplug the power adapter from the
main unit.
2
Remove the hard drive bay cover screw
and separate the cover.
Screws
Secondary Hard Drive Bay
Primary Hard Drive Bay
(optional, 17.3" models only)
3
1 Insert the secondary hard drive into
the case so that all the holes are lined
up and then 2 fasten the hard drive
screws to secure the hard drive to the
case.
1
2
Hard Drive Screws
1-54
Case