Using External Display Devices - Samsung NV20 Manual

Using External Display Devices

You can display on an external monitor or television instead of the LCD of your
notebook computer. You can duplicate the same screen on both the LCD and the
monitor simultaneously, but not the LCD and the television.
To start using an external display device
1. Connect the external monitor or the television to the monitor port or TV out port
of the computer.
2. Right-click on the desktop, and click Graphics Options > Output To. Click
Monitor, Television, or Intel(R) Dual Display Clone > Monitor + Notebook.
TV Connection Restrictions
You should only connect/disconnect cables and wires to your computer and
TV when the power is off.
TV Support Limitations
The computer will only support televisions with S-VHS output capability. The
standard composite video in port is not supported.
The TV-out port is not supported in DOS mode.
To use <Fn>+<F3> keys
Press <Fn>+<F3> to change the setting to display on the LCD, the monitor, or
simultaneously on the LCD and the monitor.
To use <Ctrl>+<Alt>+<F1/F2/F3> keys
Press <Ctrl>+<Alt>+<F1> to change the setting to display on the monitor.
Press <Ctrl>+<Alt>+<F2> to change the setting to display on the television.
Press <Ctrl>+<Alt>+<F3> to change the setting to display on the LCD.
To change setting for each display device
Right-click on the desktop, and click Graphics Options > Graphics
properties. On the Device tab, select a display device and change color
quality and screen resolution setting, then click OK.
Using External Display Devices 73