Adding A Hard Drive (Optional, 17.3" Models Only) - Samsung NP-RF410E User Manual

Table of Contents

Advertisement

Adding a Hard Drive
This computer contains either a single hard drive or dual hard
drives (optional).
If your computer has a single hard drive, you can install an
additional hard drive in the secondary hard drive bay.
The images used in the instructions below are for
illustration purposes only and may diff er from the actual
product.
Supports 9.5mmH 2.5" SATA2 notebook hard drives only
(sold separately).
Caution: Hard drive cases have sharp edges that can cause
injury.
When adding another hard drive, use the secondary hard
drive case, connector, and screws that are provided with
this product.
Adding a Hard Drive
1
Shut down the computer completely and unplug the power
adapter from the main unit.
(optional, 17.3" models only)
2
Remove the hard drive bay cover screw and separate the
cover.
Screws
Secondary Hard Drive Bay
3
Insert the secondary hard drive into the case so that all the
1
holes are lined up and then
secure the hard drive to the case.
z
Case
Chapter 3.
Settings and Upgrade
Primary Hard
Primary Hard
Drive Bay
Drive Bay
fasten the hard drive screws to
2
x
Hard Drive Screws
98

Advertisement

Table of Contents
loading

Table of Contents