Configuring Networking Settings - Samsung NV20 Manual

Using Wireless Networks in Other Operating Systems
To use wireless LAN on other operating system except Windows XP, you should
install the MagicLAN program and configure the networking settings.
Installing MagicLAN program
1. Insert the System Software CD into your CD drive.
2. Click Start > Run. Then click Browse and locate the wireless LAN setup program
and click OK.
Program location: D:\Application\Wireless\LanSetup.exe
(Assumed that the CD drive is labeled with "D:".)
3. Follow the directions displayed on the screens to complete the installation.
4. Restart your computer.

Configuring networking settings

1. Click the MagicLAN Utility (
taskbar, click Start > Programs > MagicLAN > MagicUtility > MagicLAN
Utility.
2. Click Yes on the [WLAN Configuration Utility] dialog, and then click Next on the
[Profile Wizard - Step 0/6] dialog.
If the [WLAN Configuration Utility] dialog does not appear, click Profile and
click New.
3. Type appropriate name and description in the Profile Name and Description
fields on the [Profile Wizard - Step 1/6] dialog, and click Next. For example, type
"SAMSUNG" in the Profile Name field.
4. Set the Operating Mode for the wireless network to use on the [Profile Wizard -
Step 2/6] dialog, and then click Next.
•
To connect to a computer-to-computer network: Select "802.11 Ad-hoc".
•
To connect to an access point (AP): Select "Infrastructure".
) icon on the taskbar. If it is not displayed on the
Connecting to the Internet 41