Configuring The Password; Setting The Supervisor Password; Setting The User Password - Samsung NV20 Manual

Configuring the Password

Setting the Supervisor Password

By configuring a supervisor password, you can restrict system access to authorized
users only.
1. Select the Security menu in the System Setup. To enter System Setup, see "Using
System Setup" on page 56.
2. On the Set Supervisor Password item, press <Enter>.
3. Enter a password, press <Enter>, re-enter the password for confirmation, and
press <Enter> again.
4. When a message confirming the password configuration appears in the [Setup
Notice] window, press <Enter>.

Setting the User Password

You can configure user passwords so that other users can use the system.
On the Set User Password item, press <Enter>, and complete step 3-4 of "Setting the
Supervisor Password".
Before configuring a user password, a supervisor password must have been
configured.
Users can start the system with their user password, but cannot enter into the
System Setup.
Deactivating the supervisor password also deactivates the user password.
Configuring the Password 59