Installing A Hard Drive - Samsung NP20 User Manual

Installing a Hard Drive

To install a hard drive:
1. Remove the old hard drive from the computer as described in the previous section.
2. Remove the 4 HDD retaining screws to remove the old HDD from the drive
bracket.
3. Place the new HDD into the drive bracket and the replace the 4 retaining screws.
4. Slide the new drive into the hard drive compartment. Make sure the drive is pushed
back as far as it will go.
5. Install the screw that holds the hard drive in place.
6. If required install windows and appropriate device drivers according to the
instructions below.
(Re)Installing Windows and Device Drivers
Use System Recovery CD to (re)install OS and System Software CD to (re)install
device' drivers.
The System Recovery CD is used to (re)install the OS and System Software
to a new HDD or recover from a system crash.
Notebook computers that ship from the factory include System Recover CD-
ROM and System Software CD-ROM, which contains a copy of the
applications and drivers needed for computer's operating system.
In the unlikely event that programs on the computer hard drive become
corrupted or are erased, you can use the System Recovery CD-ROM to
reinstall your operating system and then System Software CD-ROM to
reinstall your original applications and drivers.
50 Users Manual