Sharing Internet Access - Samsung NP-X1 User Manual

2. Select an icon that represents the corresponding location from the Saved Locations
window and then click Move.
3. When the network settings of the selected location are applied, the new location
and the network connection information are displayed in The detailed
Information for window.

Sharing Internet Access

This section describes the procedures to share Internet Access.
To share Internet Access, you first have to set a sharing server and a sharing client.
When the setup is complete, you can access the Internet from the sharing client by
connecting to the sharing server.
Sharing Server: A computer with 2 LAN interfaces that provide a function to
share Internet Access.
Sharing Client : A computer that uses the Internet by connecting to a sharing
server without itself having a direct connection to the Internet.
You can connect a sharing server and a sharing client as follows.(See Figure
5 on page (p82).)
External Internet Device
Connection 1 Wired LAN
Connection 2 Wireless LAN
Connection 3 Wired LAN
To connect a sharing server and a sharing client using a wired LAN, connect
the computers with a LAN cable first.
To connect through a wireless LAN, press the <Fn> and <F8> key
combination simultaneously to enable the wireless LAN. When the wireless
LAN is enabled, the Wireless LAN Operation LED (
As an example, Internet sharing procedures for [Connection 1], which connect the
sharing server and the Internet through a wired LAN and connect the sharing server and
the sharing client through a wireless LAN, are described below.
Sharing Server
Client Device
Wireless LAN
Wired LAN
Wired LAN
Sharing Client
Connect a sharing client with the
device that is the same as the
client device of the sharing server.
) lights up.
Connecting to the Internet 85