Table of Contents
Advertisement
Display Related
Q1 The LCD screen is too dark or too bright
A
Adjust the screen brightness by pressing the <Fn>+<
on the keyboard. (p14)
Q2 The screen saver disturbs screen viewing during Media Player or video file
operation.
A
Unselect Tools > Options > Player > Allow screen saver during playback in the
Media Player.
Q3 In DOS mode, changing the full screen DOS mode by pressing
<ALT>+<Enter> key displays a broken image for a short period.
A
For MS-DOS modes which support 2-byte characters such as Korean and
Japanese, the letters on the screen may be temporarily broken while setting the
video mode.
Q4 In the following cases, the screen blinks or displays noise for a short time:
(Click on the Graphics related tab, change the Resolution, change the
Display Device, remove the AC Adapter and restart the system.)
A
This may happen while the video driver is examining the connected device.
While detecting, any connected display devices may blink or some noise may
occur.
Q5 When I connect a projector, and change the setting to display screen image
on both the LCD and the projector by pressing <Fn>+<F4 /
screen is not displayed properly.
A
This happens when the projector does not support the 1280 x 768 wide resolution,
while this product does support the resolution. In this case, set the resolution to
1024 x 768 (recommended).
1.
Right-click on the Desktop and select 'Graphics Properties' from the pop-up
menu.
2.
Select 'Display Device' from the left menu and select a mode. (Dual Display
Clone or Twin)
3.
Select 'Display Settings' in the left menu and change the screen resolution.
4.
Click 'OK'.
122 Users Manual
> or <Fn>+<
>
> keys,
Advertisement
Table of Contents
