Using The Battery; Ejecting And Attaching Battery - Samsung NP-X1 User Manual

Using the Battery

Please refer to the following instructions when running the computer on battery power
without connecting the AC power.
Please read the instructions on the battery before use.
Please refer to the system operation environment (p149) of this manual and
operate and store the battery at room temperature.

Ejecting and Attaching Battery

1. Shutdown the system and close LCD.
2. Put the computer upside down on a flat surface.
3. Pull the two battery latches outward.(
4. To install the battery again, slide the battery into the system as below. The battery
latches move inward, and fix the battery automatically.
), then remove the battery.
System Management 109