Samsung NP-X1 User Manual page 97

To connect to an Access Point:
To connect to an access point or existing computer-to-computer (Ad Hoc) network,
refer to the following procedures. (To create a new computer-to-computer network,
refer to the following "To create computer-to-computer (Ad Hoc) network" section.)
1. In Available Networks, click on Refresh.
2. Select the name of desired access point or computer-to-computer network to
connect from the searched available networks list, and click Configure.
If your desired network does not appear, click Refresh.
An access point is represented by the (
network is represented by the (
an access point or a computer-to-computer network with configured security
settings.
3. Enter Profile Name and click Next.
4. In the Search Security Settings window, the wireless network security search
message will appear. Click Next.
5. Enter the network authentication, data encryption (WEP), encryption level,
key index, and wireless security password configured for the target access point
or computer-to-computer network in the Security Settings window, and click
Next.
The network authentication, data encryption (WEP), key index, and password
of a access point are configured in the access point management program.
For information on the security information, check the security settings of the
access point or ask your wireless network administrator.
To connect to an existing computer-to-computer (Ad Hoc) network, enter the
password configured when creating the computer-to-computer network for the
first time. You do not need to enter network authentication or key index.
Security Settings
- Network authentication: The network authentication option includes Open
System and Shared Key. When you select Open System, no authentication is
78 Users Manual
) icon, and a computer-to-computer
) icon. An ( ) icon is displayed in front of