Sharing Internet Access - Samsung NP-X11 User Manual

2. Select an icon that represents the corresponding location from the Saved Locations
window and then click Move.
3. When the network settings of the selected location are applied, the new location
and the network connection information are displayed in The detailed
Information for window.

Sharing Internet Access

This section describes the procedures to share Internet Access.
To share Internet Access, you first have to set a sharing server and a sharing client.
When the setup is complete, you can access the Internet from the sharing client by
connecting to the sharing server.
Sharing Server : A computer with a direct connection to the internet and a
local network connection.
Sharing Client : A computer that uses the Internet by connecting to a sharing
server without itself having a direct connection to the Internet.
You can connect a sharing server and a sharing client as follows.(See Figure
5 on page (p73))
Connection 1
Connection 2
Connection 3
For Connection 3, you have to connect a LAN card in advance.
To connect a sharing server and a sharing client using a wired LAN, connect
the computers with a crossover LAN cable or network hub first.
To use a wireless LAN, slide the Wireless LAN Latch into the ON position, if
the wireless LAN is turned off.
When the wireless LAN is turned on, the Wireless LAN Operation LED (
lights up.
As an example, Internet sharing procedures for [Connection 1], which connect the
sharing server and the Internet through a wired LAN and connect the sharing server and
the sharing client through a wireless LAN, are described below.
76 Users Manual
Sharing Server
External Internet Device
Wired LAN
Wireless LAN
Wired LAN
Client Device
Wireless LAN Connect a sharing client with the
Wired LAN device that is the same as the
Wired LAN client device of the sharing server.
Sharing Client
)