Repair Parts List - Valor G3 Series Installation Instructions Manual

4. For 738/739/RF24B(ZC). Clip the FenderFire frame
onto the brackets of the heater or ZC box within the
outer surround. If the clips securing the FenderFire
frame do not fully engage in the bracket, it may be
due to the bottom piece of the frame getting hung
up on a high spot on the hearth. If this is the case,
loosen the nuts of the bottom piece of the frame
and raise it to the appropriate height.
5. Loosen the bolts on the back of the cast iron fender
and drop the fender into place within the slotted
holes of its support at the base of the door frame.
Hang the cast iron ashpan on the hooks within the
fender.
6. Drop the door on the hinge pins.
Cleaning
The surround and the screened doors can be cleaned
with a soft brush.
To clean the fireplace glass window, refer to the
owner's manual supplied with the appliance.
Because our policy is one of constant development and improvement, details may vary slightly from those given in this publication.
Designed and Manufactured by / for
Miles Industries Ltd.
190 – 2255 Dollarton Highway, North Vancouver, B.C., CANADA V7H 3B1
Tel. 604-984-3496 Fax 604-984-0246
www.valorfireplaces.com

Repair Parts List

Extension Baffl e (not required with
1
RA24ZC applications)
Clip-on Window Trim (not required with
2
RA24ZC applications)
3 Lower Support
4 Hinge Bracket
5 Screen Door Assembly
6 Cast Fret
4
5
WARNING
DO NOT TOUCH THE DOORS OR FIREPLACE
WHILE THEY ARE HOT! Let the fireplace
cool first before cleaning it.
FOR SAFETY PURPOSE, ensure the screen
doors are closed after maintenance before
operating the fireplace.
4000622BY
4002394BY
4000631AZ
4000593
4000563VI
4000625VI
2
1
6
3
3