Verifying The Installation - Huawei UPS5000-E Series Quick Manual

12.Remove the signal cable trough cover
from the cable entry cabinet.
14.Install the right cover of the UPS cabinet on the right of the cable
entry cabinet, and install other covers in the original positions.
4

Verifying the Installation

1. Check that there is no foreign matter
at the top and bottom of the cabinet,
copper bars, switches, and the rear of
modules.
(1) Rear of modules
(2) Cabinet top
(3) Wiring terminal
blocks
(4) Switches
If the cable entry cabinet is
placed on the left of the
UPS cabinet, remove the
cable trough for signal
cables and install it on the
right of the cable entry
cabinet.
13.Connect the signal cable. (Route the signal
cable out of the UPS cabinet through the
cable hole on the top, and then into the cable
entry cabinet through the cable hole on the
top of that cabinet.)
7