Intended Use; Before The First Use; Inserting/Replacing The Saw Blade - Westfalia 1050 W RS 1050 Original Instructions Manual

Intended Use

 The reciprocating saw has been exclusively designed for cutting wood,
chipboard, plastics, PVC, fibreglass, drywall, sheet steel, iron, Aluminium and
other soft materials.
 The intended use also includes an operation following the operating instruc-
tions. Any use beyond these parameters (different media, applying force) or
any changes (reconstruction, no original accessory) can lead to serious risks
and is regarded as use that is contrary to the intended purpose.

Before the first Use

 Remove the reciprocating saw from the packaging.
 Check all parts for damage in transit and do not use a damaged saw.
 Keep packaging materials out of reach of children. There is risk of suffocation!

Inserting/replacing the Saw Blade

 Before inserting or replacing the saw blade, unplug from power mains to
prevent an unintentional start of the tool.
 Please note that the saw blade and the blade clamp will become hot during
operation. Wear safety gloves when inserting the saw blade to prevent burns
and cuts.
 Use only suitable saw blades and do not use blunt, damaged or bent saw
blades.
 Keep the blade clamp (7) always clean.
1. Pull the lever of the saw blade clamp (4) outward and hold it. Insert the saw
blade with ½" universal shank with the
cutting side down into the saw blade
clamp. Never insert the saw blade with
the cutting side up.
2. Release the lever and allow it to slide back to its original position. Make sure
the blade clamp is firmly secured!
3. Carefully pull the saw blade to make sure the saw blade is firmly secured.
Operation
17