Hardware Overview
Bottom View
1
LAN LED
The LED will light steady blue when an active
Ethernet connection is made to the Ethernet port and flash
when there is activity.
Power LED
connected to a power source.
Reset Button
Reset button for more than 10 seconds while the device is
powered on.
PoE In [24V] Port
to connect the power and should be connected to the LAN.
Default IP address: 192.168.1.20
The LED will light blue when the device is
To reset to factory defaults, press and hold the
This 10/100/1000 Ethernet port is used
2
3
4