Insert The Toner Container" Is Displayed Caused By Half-Insertion Of The Front Door Sw Connectors - Canon imageRUNNER ADVANCE C5560 Series Troubleshooting Manual

Copier Color | iR-ADV C5560/C5550/C5540/C5535 Series | imageRUNNER ADVANCE C5535, imageRUNNER ADVANCE C5535F,
imageRUNNER ADVANCE C5535i, imageRUNNER ADVANCE C5540, imageRUNNER ADVANCE C5540F, imageRUNNER ADVANCE
C5540i, imageRUNNER ADVANCE C5550, imageRUNNER ADVANCE C5550F, imageRUNNER ADVANCE C5550i, imageRUNNER
ADVANCE C5560, imageRUNNER ADVANCE C5560F, imageRUNNER ADVANCE C5560i
"Insert the toner container" is displayed caused by half-insertion
of the front door SW connectors
For CE
[Symptom]
When starting the main body, "Insert the toner container" may be displayed.
[Cause]
The connector [1] on the inner side of the toner bottle inner door interferes with the mold of the bottle front inner guide [2], and
the connector cannot be fully inserted and the above-mentioned symptom may occur.
[Service work]
1) Removing the ITB Unit
2) Removing the Process Unit
3) Pull up the Control Panel [1] and remove the Right Front Cover [2].
-1 Screw [3] (to remove)
-1 Screw [4] (to loosen)
-1 Claw [5]
4) Open the toner replacement cover [1], remove the 1 screw [3] and remove the 1 small plate [2].
10