Table of Contents
Advertisement
Message Is Displayed
This section describes some of the messages.
If a message is displayed on the printer's LCD, see below.
Message Is Displayed on Printer's LCD
If a message is displayed on the computer, see below.
Error Regarding Power Cord Being Unplugged Is Displayed (Windows)
Writing Error/Output Error/Communication Error (Windows)
Other Error Messages (Windows)
Message Is Displayed on Printer's LCD
Check the message and take appropriate action.
•
• Power was not turned off correctly the last time. Press
The printer may have been unplugged while the power was still on.
Press the printer's OK button to cancel the error.
See
Unplugging the Printer
• Cannot connect to the server. Please wait a while and try again.
•
The printer cannot connect to the server due to a communication error.
Press the printer's OK button to cancel the error and try again after a while.
• Change the paper.
•
The size of the loaded paper is different from the paper size set in Fax paper settings.
Press the printer's OK button to cancel the error.
Select Menu in Fax, check Page size and Media type in Fax paper settings, and then reload the
paper accordingly.
• Hang up phone
•
The handset is not placed in the handset cradle correctly.
Replace the handset correctly.
Note
• See Message for Faxing Is Displayed on Fax Standby Screen for the message displayed on the fax
standby screen.
Error Regarding Power Cord Being Unplugged Is Displayed (Windows)
The printer may have been unplugged while it was on.
Check the error message displayed on the computer and click OK.
The printer starts printing.
to unplug the printer correctly.
566
when turning power off.
Advertisement
Table of Contents
