Advertisement
Table of Contents
Mounting Holes Template:
Methven warrants this product against manufacturing defects and that it is suitable for use
under the general operating conditions specified in this instruction sheet. However, regional
regulations apply and may affect your warranty. Please refer to www.methven.com or call
customer service for full details.
New Zealand
0800 804 222
433951
Australia
1300 638 483
MINIMALIST BATH FILLER
Installation Guide
Technical Specifications:
Operating Pressure:
Min: 150kPa/1.5bar
Max: 500kPa/5bar*
Operating Temperature:
Hot: Max 80°C*
Cold: Min 5°C
Inlet Connections:
All ½" BSP
* Regional specific regulations apply.
Please refer to your warranty statement
at www.methven.com
UK
0800 195 1602
ISSUE B
www.methven.com
Advertisement
Table of Contents
Related Manuals for METHVEN MINIMALIST
Summary of Contents for METHVEN MINIMALIST
- Page 1 Please refer to your warranty statement at www.methven.com Methven warrants this product against manufacturing defects and that it is suitable for use under the general operating conditions specified in this instruction sheet. However, regional regulations apply and may affect your warranty. Please refer to www.methven.com or call customer service for full details.
- Page 2 IMPORTANT: This product needs to be mounted on General: a sturdy floor surface of at least mm thickness. Methven recommends this product is installed • Carefully slide the base trim cover over the pillar tube, by a licensed plumber in compliance with all...
Need help?
Do you have a question about the MINIMALIST and is the answer not in the manual?
Questions and answers