Using The Tape Counter - Samsung SV-DVD540 Instruction Manual

VCR
Searching for a Specific Sequence
GB
INTRO SCAN :
INDEX SEARCH : - 6
3
3
40
Intro Scan
1
After pressing the SEARCH, press the corresponding
buttons, until the Intro Scan option is selected.
2 Press the OK or ❿ .
3 Press the ➛ ➛ ❿ ❿
or buttons depending on the direction
where your desired programme is located.
4
When an Index mark is found the DVD-VCR will playback the
tape for 5 seconds, after which it will continue searching for the
next Index mark.
5 If you want to watch the tape from a particular Index, simply
❿ II
press .
Index Skip Search:
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different
programmes on a tape and you have rewound the tape to the
beginning, by using this feature you can go directly to the start of
programme 2 simply by pressing the SEARCH button.
1 After pressing the SEARCH, press the corresponding
buttons, until the Intro Scan option is selected.
2 Press the OK or ❿ .
3 Press the ➛ ➛ ❿ ❿
or buttons twice more. This will take
you directly to the start of the desired programme is located.
4
These Index searches can be made forwards: (press
➛ ➛ ➛ ➛
backwards: (press ). ( -20 0 +20
5 ❿ II
To cancel an Index search simply press the

Using the Tape Counter

The tape counter:
Indicates the elapsed time in the play and record
or
❷
modes (hours, minutes and seconds)
Is reset when a cassette is inserted in the DVD-VCR
Allows you to find the beginning of a sequence easily
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1 Insert a cassette in your DVD-VCR.
2 To set the tape counter to zero at the beginning of a sequence:
Press INFO. twice to display the counter
Press CLEAR when you want to set the tape counter to
zero
3
When you are ready,
Start playback or Recording.
Press the
To fast-froward or rewind to the sequence at which the
counter was set to zero, press
Some DVD-VCR information, such as the counter, can
be displayed on the television screen (unless you have
deactivated the Screen messages mode; refer to page 27).
or
❷ Press INFO.:
❿ ❿
) or
❿ ❿✌
or button.
button.
➛ ➛ ❿ ❿
or .
Once to display the current function, programme
number, recording speed, date, time and counter
Twice to display the counter only
Three times to display the time remaining on the
cassette
Four times to clear the display
VCR
GB
0:00:00
2
41