Connecting Dvd-Vcr To A Satellite Receiver Or Other Equipment; Plug & Auto Set Up - Samsung SV-DVD540 Instruction Manual

Connecting DVD-VCR to a Satellite Receiver or Other Equipment

You can connect your DVD-VCR to a Satellite receiver or other DVD-VCR using the SCART cable if the
appropriate outputs are available on the equipment chosen. The following illustrations give a few
examples of the connection possibilities.
1. AV1(EURO AV): By means of 21-pin Scart Cable
GB
Plug the SCART Cable with satellite receiver or other equipment into the AV1 (EURO AV) socket on the rear of the
DVD-VCR.
After making this connection, select the source by pressing the INPUT SEL. button for the AV1 input sources.
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the
DVD-VCR, e.g. re-adjust to channel 39.
Satellite Receiver or other Equipment
TV
RF coaxial cable
1. AV2 IN: By means of 21-pin Scart Cable
Plug the SCART Cable with satellite receiver or other equipment into the AV2 (DEC./EXT.) socket on the rear of
the DVD-VCR.
After making this connection, select the source by pressing the INPUT SEL. button for the AV2 input sources.
2. By means of RF Coaxial Cable
After making this connection, you must preset the station received through the satellite tuner.
RF output channel of the satellite receiver should be adjusted away from channel 36, which is used by the
DVD-VCR, e.g. re-adjust to channel 39.
Satellite Receiver or other Equipment
TV
SCART Cable
RF coaxial cable
12
Aerial
Aerial Connector
2
1
SCART Cable
Aerial
Aerial Connector
2
1
Plug & Auto Set up
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1
Connect the coaxial cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2 Plug the DVD-VCR into the mains.
Result: The Language Set menu is displayed.
3
Select the required language by pressing the
4
Press OK to store the language selected.
Result: A message appears.
5 Press OK button.
6 Press the or buttons to select your country.
❷
The VCR searches for the stations according to a preset
preference list corresponding to the country that you have
selected.
7
Press OK to start the auto scanning.
The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
8 The current time and date are displayed automatically.
Check the date and time.
if it is :
Correct, Press RETURN button twice to exit the menu.
incorrect, see page 17.
Auto preset can be performed by pressing
the VCR continuously for 5 seconds or more with no
tape inserted.
TV
or buttons.
❷
2
(STOP) on
Please wait
00 %
Clock Set
Time Date Year
12 : 00 1 / JAN / 2003 WED
Auto Clock : On
LINE OUT
L
GB
R
Auto setup
13