Connecting An Rca Audio/Video Input Cable; Using The Assemble Edit Function - Samsung SV-DVD540 Instruction Manual

VCR

Connecting an RCA Audio/Video Input Cable

AUX
GB
1
AUX
3
3
42
You can connect other audio/video equipment to your DVD-VCR
using audio/video cables if the appropriate outputs are available
on the equipment chosen.
Examples: You wish to copy a video cassette with the help of
a second VCR (see page 43).
You wish to play back and/or copy pictures taken
with a camcorder (see page 43).
Make sure that both the television and the DVD-
VCR are switched off before connecting the cables.
1
Connect one end of the RCA audio/video cable into the VIDEO
INPUT socket on the front of the DVD-VCR.
2 Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
3
Connect one end of the RCA audio cable supplied into the
AUDIO INPUT sockets on the front of the DVD-VCR.
Take care to respect the colour coding of the left and right
channels.
4
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).

Using the Assemble Edit Function

This function allows you to start a new recording at a specific
position on the cassette while maintaining a very smooth scene
change.
1 Insert the cassette to be edited in your DVD-VCR.
❿
2 Press the ll button to start playback.
3
When you reach the position from which you wish to start the
❿
new recording, press the ll button.
4
Press the F.ADV/STEP ( ) button again as often as
necessary to advance frame by frame, until the exact recording
position is located.
5
While the DVD-VCR is in still mode, hold the REC button ( )
down for a while to activate the Assemble Edit function.
6 Select the source from which you wish to record by pressing:
The PROG ( or ) buttons for television channels
The INPUT SEL. button for the AV1, AV2 or AUX input
sources
❿
7
Press the ll button to start recording.
8
When you have finished recording, press .
Recoding from Another VCR or Camcorder
You can copy a cassette to your DVD-VCR from another video
source, such as another VCR or a camcorder.
It is an infringement of copyright laws to copy
prerecorded cassettes or to re-record them in any form
without the permission of the owners of the
corresponding copyright.
1
Connect the DVD-VCR, from which the cassette is to be copied,
to the appropriate SCART audio and video input connectors on
the rear of your DVD-VCR, as indicated on page 11.
2
Insert a blank cassette in your DVD-VCR.
3
Insert the pre-recorded cassette in the other video source (VCR
or camcorder).
4
Press the INPUT SEL. button to select the appropriate input on
your DVD-VCR:
AV1, AV2 for the SCART input
AUX for the RCA input
5
Start playing back the cassette to be copied.
6
Hold REC ( ) down for a while to start recording on your
DVD-VCR.
7
When you have finished recording, press on both VCR and
DVD-VCR.
If you wish to view the cassette being copied:
Your DVD-VCR must be connected as usual to the
television (see page 11 for further details)
VCR
4
GB
2
OK
5
VCR
EJECT
AUX
2
7
OK
6
43