Installing A Cli For Updating The Bios And Fcode - Sun Microsystems StorageTek SG-XPCIE1FC-QF8-Z Installation Manual

8 gb fc pci-express hba

Table of Contents

Installing a CLI for Updating the BIOS

and FCode

If you need to update the fibre channel BIOS and FCode, you can do so by using the

SANsurfer command-line interface (CLI).

If you have not done so already, you can download the SANsurfer CLI package from

the QLogic support site for Sun Microsystems at:

http://support.qlogic.com/support/defaultsun_page.asp

Follow the installation instructions in the README.TXT file. Installation instructions

are also available in the QLogic document, SANsurfer FC HBA CLI User's Guide

(SN0054614-00), which can be found on the QLogic web site,

http://www.qlogic.com.

For instructions on how to update the BIOS and FCode, see the SANsurfer FC HBA

CLI User's Guide at the QLogic web site.

Sun StorageTek 8 Gb FC PCI-Express HBA Installation Guide • September 2009

Table of Contents

Need help?

Do you have a question about the StorageTek SG-XPCIE1FC-QF8-Z and is the answer not in the manual?

Storagetek sg-xpcie2fc-qf8-z