To Install Diagnostic Support For The Red Hat/Suse Linux Os; Installing Software For The Vmware Technology; Installing Software For The Windows Os - Sun Microsystems StorageTek SG-XPCIE1FC-QF8-Z Installation Manual

▼ To Install Diagnostic Support for the Red Hat/SUSE
Linux OS
1. Go to the QLogic support site for Sun Microsystems at:
http://support.qlogic.com/support/defaultsun_page.asp
2. Locate the table containing the HBA model: single-port SG-XPCIE1FC-QF8-Z or
dual-port SG-XPCIE2FC-QF8-Z.
3. At the bottom of the table, click Windows.
4. Locate the SANsurfer CLI (command-line interface) or SANsurfer PRO (GUI)
diagnostic utility.
5. Click Download to copy diagnostic archive to a local file system.
6. Click Readme link for additional information.
Installing Software for the VMware
Technology
The HBA drivers included on the VMware distribution are sufficient for supporting
the HBA. No further action is required.
To verify that the drivers loaded successfully, look for the following lines in the
/var/log/vmkernel file:
Initialization for qla2300_707_vmw succeeded with module ID 2.
[timestamp] b12-4600a vmkernel: 0:00:01:18.878
cpu1:1041)qla2300_707_vmw loaded successfully.
The first line indicates that the fibre channel driver loaded successfully.

Installing Software for the Windows OS

This section describes how to download and install the fibre channel drivers
required by the HBA. It also describes how to install diagnostic support software for
the HBA. This section contains the following topics:
"To Download the Fibre Channel Driver" on page 32
■
Chapter 3 Software Installation 31