To Verify Proper Installation (X64 Systems) - Sun Microsystems StorageTek SG-XPCIE1FC-QF8-Z Installation Manual

{0} ok show-disks
a) /pci@0/pci@0/pci@8/pci@0/pci@2/SUNW,qlc@0,1/fp@0,0/disk
b) /pci@0/pci@0/pci@8/pci@0/pci@2/SUNW,qlc@0/fp@0,0/disk
c) /pci@0/pci@0/pci@2/scsi@0/disk
d) /pci@0/pci@0/pci@1/pci@0/pci@1/pci@0/usb@0,2/storage@2/disk
q) NO SELECTION
Enter Selection, q to quit: b
{0} ok select /pci@0/pci@0/pci@8/pci@0/pci@2/SUNW,qlc@0
QLogic QLE2562
Firmware version 4.03.02
{0} ok show-children
Adapter portID - 11000
************** Fabric Attached Devices **************
Dev# 0(0)
Dev# 1(1)
{0} ok

▼ To Verify Proper Installation (x64 Systems)

1. During system power-on initiation, the following system booting BIOS
initialization screen is displayed.
QLogic Corporation
QLE2562 PCI Fibre Channel ROM BIOS version 2.02
Copyright (c) QLogic Corporation 1992-2008. All rights reserved.
www.qlogic.com
Press <Ctrl-Q> or <Alt-Q> for Fast!UTIL
BIOS for Adapter 0 is disabled
BIOS for Adapter 1 is disabled
ROM BIOS NOT INSTALLED
2. Immediately press Control-Q.
The following QLogic Fast!UTIL menu is displayed.
20 Sun StorageTek 8 Gb FC PCI-Express HBA Installation Guide • September 2009
Host Adapter FCode(SPARC): 2.03
PortID 100e8
LUN 0(0) DISK
PortID 10100
LUN a(10) DISK
LUN b(11) DISK
Port WWN 21000011c68115b3
SEAGATE ST336854FC
Port WWN 201500a0b84718a4
STK FLEXLINE 380
STK FLEXLINE 380
06/30/08
0005
0619
0619