Removing The Hardware; To Remove The Hba - Sun Microsystems StorageTek SG-XPCIE1FC-QF8-Z Installation Manual

Removing the Hardware

The following instructions describe the tasks required to remove the HBA. Refer to
your system installation or service manual for detailed HBA removal instructions.
The following steps summarize the hardware removal process:
1. Halt the operating system and remove power from the system.
2. Remove the HBA hardware.

▼ To Remove the HBA

1. Use an ESD strap (refer to
page
2. Refer to your system documentation to shut down, power off, and unplug the
system.
3. Disconnect all cables.
4. Unscrew the case screws and remove the system case.
5. Remove the mounting bracket of the HBA from the system by unscrewing the
panel screw or removing the clip, whichever is being used.
You can now remove the HBA.
24 Sun StorageTek 8 Gb FC PCI-Express HBA Installation Guide • September 2009
11).
"Observing ESD and Handling Precautions" on