Dalsa Piranha4 User Manual page 71

Full Name Set Line Delay
Mnemonic ssa
Argument(s) # of lines
Description
Sets the number of lines of delay between colors that are read out from the sensor
(default 2).
Notes
If your line rate matches the speed of the object, then the value of the line delay w ill
be 2. Adjust the ssa value until you remove the red and blue halos above and below
a black on white horizontal line in order to set the line delay.
Full Name Offset
Mnemonic ssb
Argument(s) Offset
Description Set offset
Notes -4096 in DN12b correspond to -256 in DN8b
Full Name Internal Line Rate
Mnemonic ssf
Argument(s) Line rate
Description Set internal line rate
Notes •
Full Name Gain
Mnemonic ssg
Argument(s) 0. Preamp
1. System
2. Contrast expansion
3. Contrast offset
4. Red gain
5. Green gain
6. Blue gain
Description Set gain
Notes
Full Name External Trigger
Mnemonic stm
Argument(s) Mode
Description Set trigger mode
Notes •
•
Piranha4 8K Color Camera User's Manual
Line time > ( Exposure time + 2,500 ns )
When off, line rate is controlled by ssf command
When on, integration starts on rising edge of CC1 signal
0 (0 line) to 1535 (5.996 lines)
8 bit -4096 to 4095 step 1 in DN12b
1 to 33,000 [Hz]
0: x1, 1: x2, 2: x4
1024 (x1) to 4095 (x3.999)
1024 (x1) to 65535 (x63,999)
-4096 (-256) to 4095 (255,9375)
1024 (x1) to 4095 (x3.999)
1024 (x1) to 4095 (x3.999)
1024 (x1) to 4095 (x3.999)
0. Off
1. On
Appendix B: ASCII Commands • 71