Dalsa Piranha4 User Manual page 28

External Line Rate, Programmable Exposure Time
In this mode, the line rate is set externally with the falling edge of EXSYNC. When the line
rate changes, exposure time may need to be decreased, to accommodate the new line rate.
When adjusting the exposure time the range is limited by the line rate.
GenICam Parameter Settings
Digital IO Controls: TriggerMode
Camera Control: ExposureMode
External Line Rate and Maximum Exposure Time
In this mode, the line rate is set externally with the falling edge of EXSYNC. When the line
rate changes, exposure time will automatically adjust, to accommodate the new line rate.
GenICam Parameter Settings
Digital IO Controls: TriggerMode
Camera Control: ExposureMode
External Trigger Off, Maximum exposure
Free running, not synchronized to an external signal
External Trigger Off, Internal Exposure Control
Free running, not synchronized to an external signal
External Trigger On, Maximum exposure
CC1 rising edge triggers start of internal exposure
28 • Camera Operation
= On
= Timed
= On
= Maximum
Piranha4 8K Color Camera User's Manual