Dalsa Piranha4 User Manual page 66

Full Name Display Camera Configuration
Mnemonic gcp
Argument(s)
Description Display current value of camera configuration parameters
Notes USER>gcp
Model Name
FW version
Serial Number
User Id
Default User Set 0
Line Rate
Trigger Mode – Off
Exposure Mode - Timed
Exposure Time
Max Exposure time 15498
Test Pattern Image – Off
Scan Direction – Internal, Forward
Sensor Line Spatial Correction – Off
Flat Field Mode State – On
White Balance Enable – On
Color Matrix Enable – On
Contrast Expansion offset 0
System Numeric Gain 1024
Gain for red 1024
Gain for green 1024
Gain for blue 1024
Color Matrix Selector 4
Color Correction Matrix:
Mirroring Mode – Off
Camera Link frequency – 85MHz
Camera Link mode – 8bits RGB_Base 3Taps
Pixel Format
USER>
Full Name Get Value
Mnemonic get
Argument(s) <parameter>
Description The "get" command displays the current value(s) of the feature specified
in the string parameter. Using this command will be easier for control
software than parsing the output from the "gcp" command.
Notes User>get ssf
10000
>Ok
Short Full Name
bwa
ccf
cls
clm
cpa
ctv
66 • Appendix B: ASCII Commands
P4_8K
1.3.0
1914A3564
MyCamera
10000 [Hz]
10000
8K TriLinear RGB
Balance white auto
Calibrate User FPN
Camera Link Speed
Camera Link Mode
Calibrate Flatfield
Color Transformation Value fixed point values (2exp-6) 18lines
49, 25, -10
-25, 79, 10
-34, -15, 113
Displayed Value and Description
No value returned
0: calibration complete
0:85; 1:80; 2:60; 3:42.5 [MHz]
0: Base 1: Med 2: Full 3: Deca
0: calibration complete
Color correction matrix gains
0 49
Piranha4 8K Color Camera User's Manual